Vallox > MyVallox 125A CFi
MyVallox 125A CFi
MyVallox 125A CFi
MyVallox 125A CFi can replace many old ventilation unit models, quickly and easily. MyVallox 125A CFi is a modern, automated and energy-efficient ventilation unit that provides carefree ventilation. The unit’s duct outlets match the old unit’s outlets, making installation easy without any or with minor duct modifications. This makes ventilation refurbishment easier and saves costs.
The MyVallox 125A CFi ventilation unit is a direct replacement (identically placed duct outlets) for MUH Ilmava, MUH Ilmava OK, MUH Ilmava 100, MUH Ilmava 120 and Vallox 121. With small duct size modifications of only a few millimetres, it can also replace models such as Onnline 100, Ilto 300 and Haato LTO21. The replacement of models including Deekax Talteri DIVK 400 and Parmair ExSO requires more extensive modifications but is nevertheless possible. All replaceable models are listed in the unit’s replacement compatibility chart.
A modern ventilation unit automatically ensures good indoor air quality with integrated humidity and carbon dioxide sensors. The unit continuously supplies clean, filtered air at the desired temperature and boosts ventilation according to the need. Energy-efficient, high-quality ventilation improves the comfort of living, promotes the residents’ health and saves money. MyVallox 125A CFi matches the requirements for modern ventilation perfectly.
The ventilation unit’s heat recovery efficiency is excellent at nearly 80%. The efficiency figure indicates how effectively the unit uses the heat recovered from extract air to heat the supply air. Efficient heat recovery keeps the energy consumption of ventilation low even at a higher output, and separate preheating is no longer needed.
The new constant flow feature increases living comfort and makes installation easier. MyVallox 125A CFi features constant flow fans that compensate for differences in pressure and keep the air flows in balance in windy locations and tall buildings, during HR cell defrosting, and regardless of the heat recovery bypass status. The constant flow feature also compensates for separate extractions. The new constant flow function also makes the installer’s job easier because it allows litre-based air flow adjustment directly from the controller. The fans of the MyVallox 125A CFi unit consume very little electricity. Thanks to the advanced defrosting automation system, the unit will not stop the supply air fan even in the coldest weather.
The unit’s high-quality filters are significantly larger compared to old ventilation unit models, and they effectively prevent impurities from entering the indoor air. The ventilation unit provides diverse control options, and it can be registered with the free MyVallox Cloud service. The unit can be controlled remotely via the cloud service. The unit can also be connected to building automation.
The MyVallox 125A CFi ventilation unit is a direct replacement (identically placed duct outlets) for MUH Ilmava, MUH Ilmava OK, MUH Ilmava 100, MUH Ilmava 120 and Vallox 121. With small duct size modifications of only a few millimetres, it can also replace models such as Onnline 100, Ilto 300 and Haato LTO21. The replacement of models including Deekax Talteri DIVK 400 and Parmair ExSO requires more extensive modifications but is nevertheless possible. All replaceable models are listed in the unit’s replacement compatibility chart.
A modern ventilation unit automatically ensures good indoor air quality with integrated humidity and carbon dioxide sensors. The unit continuously supplies clean, filtered air at the desired temperature and boosts ventilation according to the need. Energy-efficient, high-quality ventilation improves the comfort of living, promotes the residents’ health and saves money. MyVallox 125A CFi matches the requirements for modern ventilation perfectly.
The ventilation unit’s heat recovery efficiency is excellent at nearly 80%. The efficiency figure indicates how effectively the unit uses the heat recovered from extract air to heat the supply air. Efficient heat recovery keeps the energy consumption of ventilation low even at a higher output, and separate preheating is no longer needed.
The new constant flow feature increases living comfort and makes installation easier. MyVallox 125A CFi features constant flow fans that compensate for differences in pressure and keep the air flows in balance in windy locations and tall buildings, during HR cell defrosting, and regardless of the heat recovery bypass status. The constant flow feature also compensates for separate extractions. The new constant flow function also makes the installer’s job easier because it allows litre-based air flow adjustment directly from the controller. The fans of the MyVallox 125A CFi unit consume very little electricity. Thanks to the advanced defrosting automation system, the unit will not stop the supply air fan even in the coldest weather.
The unit’s high-quality filters are significantly larger compared to old ventilation unit models, and they effectively prevent impurities from entering the indoor air. The ventilation unit provides diverse control options, and it can be registered with the free MyVallox Cloud service. The unit can be controlled remotely via the cloud service. The unit can also be connected to building automation.
Including accessories: MyVallox Control controller, condensing water seal Vallox SilentKlick, wall mounting plate.
Description
Check the correspondence table to see if this model is suitable for replacing your old ventilation unit.
Read more and watch the videos of product introduction and installation of the ventilation unit.
Suitable for the following applications
Maximum recommended living area
180 m²
Annual efficiency (%)
75
Temperature efficiency of heat recovery (%)
80.9
SEC average climate
-38.937 kWh/m²a
Reference airflow rate
0.075 m³/s
Specific power input (SPI)
0.428 W/(m³/h)
Specific Fan Power (SFP)
1.541 kW/(m³/s)
Maximum extract airflow @ 100 Pa
111 l/s
Maximum supply airflow @ 100 Pa
107 l/s
Maximum supply airflow EcoDesign
384 m³/h
Duct outlets pcs
6
Duct outlet mm
125 mm
Product depth mm
601
Product width mm
598
Product height mm
525
Product weight
65.5 kg
Package weight
69 kg
ETIM EF003701 electrical connection
Connection cable with protective earthed plug
Mounting place
Wall
Remote monitoring options
MyVallox Cloud service, MyVallox Home network, External voltage message 0-10 VDC
Bus control
Modbus RTU (standard feature)
Extract air fan power consumption
0.165 kW
Supply air fan power consumption
0.165 kW
Sound power level
45 dB
Cell type
Cross-counter flow cell
Cell
Aluminium
HRU cell bypass
Automatic heat recovery bypass, partial bypass with cool recovery
Defrosting method
Vallox on-demand -defrosting automatics with heat recovery cell bypass
Post-heating
Electrical resistor, 900 W
Additional heating
Electrical resistor, 900 W
Electrical connection
230 V / 50 Hz / 9,8 A
Encapsulation class
IP34
Unit maximum power consumption
2.13 kW
MyVallox 125A CFi RA12
HVAC number: 7912231
The MyVallox Control control panel is included in the price.
Product weight: 65.5 kg
Package weight: 69 kg
GTIN: 6438326006217
MyVallox 125A CFi LA12
HVAC number: 7912232
The MyVallox Control control panel is included in the price.
Product weight: 65.5 kg
Package weight: 69 kg
GTIN: 6438326006224