Vallox SE humidity sensor

The Vallox SE humidity sensor enables the automatic control of ventilation in SE units on the basis of the humidity of indoor air. The sensor boosts the ventilation if the humidity level increases in the room where the sensor is located. With the sensor, the ventilation is automatically boosted after a shower, for instance, and it returns to the normal level after the removal of the excessive moisture. In this way, humidity cannot condense in the structures and cause damage.

The self-learning humidity-based control of the Vallox SE humidity sensor automatically adjusts to the varying humidity levels caused by seasonal changes. The humidity level setting does not need to be set manually; the sensor sets the correct value on the basis of the history data collected and updates it as needed.

The humidity sensor is installed high up on the bathroom wall, so that it is protected from splash water or the dry air transmitted into the bathroom through the door. Two humidity sensors may be connected to the air ventilation unit.

Vallox air quality sensors are maintenance-free and require no calibration. SE sensors can also be retrofitted on all Vallox SE models.

Also read about the Vallox SE carbon dioxide sensor that boosts the automation of ventilation.