Vallox > MyVallox 125H CFi
MyVallox 125H CFi
MyVallox 125H CFi
The different MyVallox 125 CFi models differ from each other only with respect to the duct outlets. They can replace dozens of old ventilation unit models, quickly and easily. When expensive duct modifications are skipped, the refurbishment can be carried out at a low cost. MyVallox 125H CFi replaces the Iloxair Mosaik ventilation unit directly without modifications (duct outlets in the same places). For more details, check the unit’s replacement compatibility chart.
A modern ventilation system automatically ensures good indoor air quality with integrated humidity and carbon dioxide sensors. For a user who prefers manual control, there are diverse control options. The ventilation unit can also be registered with the free MyVallox Cloud service. The unit can be controlled remotely via the cloud service. The unit can also be connected to building automation.
The unit removes humid, high-carbon-dioxide air and recovers its heat and recirculates it into the fresh and filtered supply air to keep the indoor air at the desired temperature. The unit is able to recover nearly 80% of the extract air heat, making it a more energy-efficient solution. Energy-efficient, high-quality ventilation improves the comfort of living, promotes the residents’ health and saves money. MyVallox 125H CFi matches the requirements for modern ventilation perfectly.
With the current EC motors, the Vallox 125 MV fans consume very little electricity. Thanks to the advanced defrosting automation, the unit will not stop the supply air fan even in the coldest weather. The larger high-quality filters efficiently prevent impurities from entering the indoor air.
MyVallox 125H CFi has a new constant flow feature that increases living comfort and makes the unit’s setup easier. The ventilation unit features constant flow fans that compensate for differences in pressure and keep the air flows in balance in windy locations and tall buildings, during HR cell defrosting, and regardless of the heat recovery bypass status. The constant flow feature also compensates for separate extractions. The new constant flow function also makes the installer’s job easier because it allows litre-based air flow adjustment directly from the controller.
A modern ventilation system automatically ensures good indoor air quality with integrated humidity and carbon dioxide sensors. For a user who prefers manual control, there are diverse control options. The ventilation unit can also be registered with the free MyVallox Cloud service. The unit can be controlled remotely via the cloud service. The unit can also be connected to building automation.
The unit removes humid, high-carbon-dioxide air and recovers its heat and recirculates it into the fresh and filtered supply air to keep the indoor air at the desired temperature. The unit is able to recover nearly 80% of the extract air heat, making it a more energy-efficient solution. Energy-efficient, high-quality ventilation improves the comfort of living, promotes the residents’ health and saves money. MyVallox 125H CFi matches the requirements for modern ventilation perfectly.
With the current EC motors, the Vallox 125 MV fans consume very little electricity. Thanks to the advanced defrosting automation, the unit will not stop the supply air fan even in the coldest weather. The larger high-quality filters efficiently prevent impurities from entering the indoor air.
MyVallox 125H CFi has a new constant flow feature that increases living comfort and makes the unit’s setup easier. The ventilation unit features constant flow fans that compensate for differences in pressure and keep the air flows in balance in windy locations and tall buildings, during HR cell defrosting, and regardless of the heat recovery bypass status. The constant flow feature also compensates for separate extractions. The new constant flow function also makes the installer’s job easier because it allows litre-based air flow adjustment directly from the controller.
Including accessories: MyVallox Control controller, condensing water seal Vallox SilentKlick, wall mounting plate.
Description
Check the correspondence table to see if this model is suitable for replacing your old ventilation unit.
Read more and watch the videos of product introduction and installation of the ventilation unit.
Suitable for the following applications
Maximum recommended living area
180 m²
Annual efficiency (%)
75
Temperature efficiency of heat recovery (%)
80.9
SEC average climate
-38.937 kWh/m²a
Reference airflow rate
0.075 m³/s
Specific power input (SPI)
0.428 W/(m³/h)
Specific Fan Power (SFP)
1.541 kW/(m³/s)
Maximum extract airflow @ 100 Pa
111 l/s
Maximum supply airflow @ 100 Pa
107 l/s
Maximum supply airflow EcoDesign
384 m³/h
Duct outlets pcs
4
Duct outlet mm
160 mm
Product depth mm
601
Product width mm
598
Product height mm
525
Product weight
65.5 kg
Package weight
69 kg
ETIM EF003701 electrical connection
Connection cable with protective earthed plug
Mounting place
Wall
Remote monitoring options
MyVallox Cloud service, MyVallox Home network, External voltage message 0-10 VDC
Bus control
Modbus RTU (standard feature)
Extract air fan power consumption
0.165 kW
Supply air fan power consumption
0.165 kW
Sound power level
45 dB
Cell type
Cross-counter flow cell
Cell
Aluminium
HRU cell bypass
Automatic heat recovery bypass, partial bypass with cool recovery
Defrosting method
Vallox on-demand -defrosting automatics with heat recovery cell bypass
Post-heating
Electrical resistor, 900 W
Additional heating
Electrical resistor, 900 W
Electrical connection
230 V / 50 Hz / 9,8 A
Encapsulation class
IP34
Unit maximum power consumption
2.13 kW
MyVallox 125H CFi RA12
HVAC number: 7912245
The MyVallox Control control panel is included in the price.
Product weight: 65.5 kg
Package weight: 69 kg
GTIN: 6438326006491
MyVallox 125H CFi LA12
HVAC number: 7912246
The MyVallox Control control panel is included in the price.
Product weight: 65.5 kg
Package weight: 69 kg
GTIN: 6438326006507