Vallox > MyVallox 125F CFi
MyVallox 125F CFi
MyVallox 125F CFi
Is your current ventilation unit model Ilto 430, Ilto 440 Control, Ilto 440 Premium or Onnline 130?
In that case, MyVallox 125F CFi fits directly in place of the old unit or requires only minor duct modifications. This makes ventilation refurbishment easier and saves costs. For more details, check the unit’s replacement compatibility chart.
A modern ventilation unit maintains fresh indoor air automatically – and so does MyVallox 125F CFi. The integrated humidity and carbon dioxide sensors of the unit monitor the indoor air quality and boosts ventilation when necessary, for example, when the humidity level of indoor air increases. When the indoor air quality has been restored, the ventilation output returns to the normal level automatically. There is rarely a need to control the unit manually, but if the user wishes to do so, there are multiple control options. The unit can be controlled traditionally with a control panel or via the free MyVallox Cloud service. The unit can also be connected to separate switches, such as a fireplace switch, or building automation.
The ventilation unit continuously supplies fresh and filtered air heated to the desired temperature with heat recovered from extract air. The heat recovery efficiency of MyVallox 125F CFi is nearly 80%, meaning that nearly 80% of the heat from extract air can be recovered and recirculated. This has a direct impact on the cost of the home’s primary heating system.
MyVallox 125F CFi’s operation is constant under all circumstances, ensuring smooth and discreet ventilation. MyVallox 125F CFi features constant flow fans that compensate for differences in pressure and keep the air flows in balance in windy locations and tall buildings, during HR cell defrosting, and regardless of the heat recovery bypass status. The constant flow feature also compensates for separate extractions. The new constant flow function also makes the installer’s job easier because it allows litre-based air flow adjustment directly from the controller.
The ventilation unit provides diverse control options, and it can be registered with the free MyVallox Cloud service. The unit can be controlled remotely via the cloud service. The unit can also be connected to building automation.
In that case, MyVallox 125F CFi fits directly in place of the old unit or requires only minor duct modifications. This makes ventilation refurbishment easier and saves costs. For more details, check the unit’s replacement compatibility chart.
A modern ventilation unit maintains fresh indoor air automatically – and so does MyVallox 125F CFi. The integrated humidity and carbon dioxide sensors of the unit monitor the indoor air quality and boosts ventilation when necessary, for example, when the humidity level of indoor air increases. When the indoor air quality has been restored, the ventilation output returns to the normal level automatically. There is rarely a need to control the unit manually, but if the user wishes to do so, there are multiple control options. The unit can be controlled traditionally with a control panel or via the free MyVallox Cloud service. The unit can also be connected to separate switches, such as a fireplace switch, or building automation.
The ventilation unit continuously supplies fresh and filtered air heated to the desired temperature with heat recovered from extract air. The heat recovery efficiency of MyVallox 125F CFi is nearly 80%, meaning that nearly 80% of the heat from extract air can be recovered and recirculated. This has a direct impact on the cost of the home’s primary heating system.
MyVallox 125F CFi’s operation is constant under all circumstances, ensuring smooth and discreet ventilation. MyVallox 125F CFi features constant flow fans that compensate for differences in pressure and keep the air flows in balance in windy locations and tall buildings, during HR cell defrosting, and regardless of the heat recovery bypass status. The constant flow feature also compensates for separate extractions. The new constant flow function also makes the installer’s job easier because it allows litre-based air flow adjustment directly from the controller.
The ventilation unit provides diverse control options, and it can be registered with the free MyVallox Cloud service. The unit can be controlled remotely via the cloud service. The unit can also be connected to building automation.
Including accessories: MyVallox Control controller, condensing water seal Vallox SilentKlick, wall mounting plate.
Description
Check the correspondence table to see if this model is suitable for replacing your old ventilation unit.
Read more and watch the videos of product introduction and installation of the ventilation unit.
Suitable for the following applications
Maximum recommended living area
180 m²
Annual efficiency (%)
75
Temperature efficiency of heat recovery (%)
80.9
SEC average climate
-38.937 kWh/m²a
Reference airflow rate
0.075 m³/s
Specific power input (SPI)
0.428 W/(m³/h)
Specific Fan Power (SFP)
1.541 kW/(m³/s)
Maximum extract airflow @ 100 Pa
111 l/s
Maximum supply airflow @ 100 Pa
107 l/s
Maximum supply airflow EcoDesign
384 m³/h
Duct outlets pcs
4
Duct outlet mm
160 mm
Product depth mm
601
Product width mm
598
Product height mm
525
Product weight
65.5 kg
Package weight
69 kg
ETIM EF003701 electrical connection
Connection cable with protective earthed plug
Mounting place
Wall
Remote monitoring options
MyVallox Cloud service, MyVallox Home network, External voltage message 0-10 VDC
Bus control
Modbus RTU (standard feature)
Extract air fan power consumption
0.165 kW
Supply air fan power consumption
0.165 kW
Sound power level
45 dB
Cell type
Cross-counter flow cell
Cell
Aluminium
HRU cell bypass
Automatic heat recovery bypass, partial bypass with cool recovery
Defrosting method
Vallox on-demand -defrosting automatics with heat recovery cell bypass
Post-heating
Electrical resistor, 900 W
Additional heating
Electrical resistor, 900 W
Electrical connection
230 V / 50 Hz / 9,8 A
Encapsulation class
IP34
Unit maximum power consumption
2.13 kW
MyVallox 125F CFi RA12
HVAC number: 7912241
The MyVallox Control control panel is included in the price.
Product weight: 65.5 kg
Package weight: 69 kg
GTIN: 6438326006415
MyVallox 125F CFi LA12
HVAC number: 7912242
The MyVallox Control control panel is included in the price.
Product weight: 65.5 kg
Package weight: 69 kg
GTIN: 6438326006422