MyVallox 51 CFi
Space saver for small homes
The compact MyVallox 51 CFi ventilation unit and its K model are only 349 mm deep, so they can be incorporated into the kitchen cabinets or installed above the toilet seat, for example. The MyVallox 51 CFi unit’s air volume is ideal for an apartment with a maximum floor area of 75 m2.
MyVallox 51 CFi suits bathrooms that meet the accessibility requirements set for smaller homes
A bathroom meets the accessibility requirements if a person using a wheelchair or a walker can use the room independently or assisted. In other words, the bathroom must be roomy enough with a minimum diameter of 1.3 metres of clear floor area. This so-called accessibility circle must be free of any fixtures from floor to a height of two metres.
In apartment buildings, it is common to install the ventilation unit above a wash tower. A washing machine is not considered equal to a fixture, but a ventilation unit is since its fixation penetrates the room’s waterproofing. Due to the accessibility circle, it is not always possible to install the ventilation unit above a wash tower.
Vallox has developed a solution for this problem. Vallox’s MyVallox 51 CFi is only 349 mm deep, so it can be installed, for example, above the toilet seat without obstructing the area that should be kept clear of fixtures.
A ventilation unit and cooker hood combo can be incorporated into the kitchen cabinets
MyVallox 51K CFi is installed in the kitchen, and it combines ventilation and removal of cooking smells. When the ventilation unit is installed in the kitchen, it saves space in smaller apartments. Space no longer needs to be reserved for the ventilation unit in, for example, the bathroom, where space may be very limited.
Studies show that the ability of the residents to adjust the efficiency of ventilation based on their individual lifestyle enhances their comfort of living. The kitchen solution enables apartment-specific ventilation, even in very small apartments. When the ventilation unit is integrated with the kitchen cabinet, similarly to domestic appliances, it is elegantly out of sight, yet easy to use and service. There is plenty of space for carrying out maintenance, such as replacing the filter, in front of the kitchen cabinets.
Quick to install and set up
MyVallox CFi ventilation units are easy to set up. The constant flow feature allows the air flows to be adjusted by litre directly from the control panel or by connecting the ventilation unit to a computer.
If the unit is set up on a computer, the setup settings can be saved to the computer and used later for the setup of ventilation units in similar locations. A PDF file summarising the settings can also be downloaded and attached to the measurement log.
The constant flow feature is integrated into the fan of the unit and no additional installation work on the duct system is needed. When the anemometer measuring the air flow is in the fan, there is no fear of blocked measuring tubes either.
Energy-efficient and modern ventilation unit
MyVallox 51 CFi has all the properties of a modern ventilation unit. With an indicative maximum floor area of 75 m², this unit is best suited for one- and two-bedroom apartments and for smaller three-bedroom apartments.
The unit’s constant flow feature balances ventilation, keeping the air flow always at the preferred level. The integrated carbon dioxide and humidity sensor ensures that ventilation is boosted automatically where required.
The unit is rated in energy class A+. The extract air of the cooker hood passes through the heat recovery cell. Special attention has been paid to acoustic properties in the design of the unit that is intended for use in kitchens.
The metal structure makes Vallox 51K MV a fire-safe ventilation solution for kitchen installations. The electric assembly can be removed as one piece, allowing for easy maintenance.
Vallox Captura cooker hood
The Vallox Captura cooker hood is only compatible with MyVallox 51K CFi ventilation units. The modern and minimalistic cooker hood has a low front panel that merges with the kitchen cabinet and has capacitive switches that have been marked with clear icons.
The smooth switch panel makes it easy to keep the cooker hood clean. The cooker hood has no glass surfaces or easily damaged mechanical parts. The cooker hood is equipped with a motorised flap. The Vallox Captura cooker hood has a standard width of 600 mm. The cooker hood is available in white and stainless steel.
