Vallox Aito Kotilämpö
Vallox Aito Kotilämpö
The Aito Kotilämpö air heating unit can be installed directly in place of Valmet Kotilämpö without major changes to the duct network. It can also replace other air heating units, such as Aeromaster, Energiset, Himablock, ILA-15, Oilon Oiva, Parma 10 and Thermovent, but these may require minor changes to the duct network.
The unit’s annual efficiency of heat recovery is 77%. The DC fans with a 50% lower electricity consumption and the clearly improved heat recovery efficiency ensure that the Aito Kotilämpö air heating unit consumes considerably less energy when compared to the old units.
The ventilation part of the air heating unit features automatic heat recovery with a partial bypass, a maintenance reminder, a week clock, filters that clean air efficiently and integrated humidity and carbon dioxide sensors that boost the ventilation when necessary. Thanks to the defrosting automation, the efficiency remains high even in very cold weather and underpressure will not increase in the building.
It is also possible to connect an additional carbon dioxide sensor to Aito Kotilämpö, or an additional switch for boosting the ventilation or for the fireplace function. Ventilation is controlled via the MyVallox control panel, the free Vallox Cloud service, the home network or the house automation.
The additional heating part includes a six-row liquid circulation heating radiator that efficiently heats the home at a low circulating air flow without creating a draught. The efficiency of the radiator is controlled with the same control panel as the ventilation. There is a specific four-step control panel for adjusting the speed of the circulating air fan.
Why does Vallox Aito Kotilämpö report an error during the defrosting cycle?
If the control panel of Aito Kotilämpö reports an error, check the main settings first.
- Defrosting method: Bypass, Indoor %Rh 0, and Outdoor air °C 20.
- Heating settings: Heating method Electrical resistor (Must never be turned off!) Post-heating None.
- Control settings: °C adjustment method Extract air and Humidity Automatic.
- 1/0 and bus settings: External sensor Setting: Air heating. Relay settings: Air heating.
If the error persists, carry out a heater test as follows: When at least 5 minutes has passed since the error message disappeared, check the supply air temperature (°C) from the temperature display of the At home mode and write it down. Next, test the additional heater. When the test has been on for a couple of minutes, you can exit the test. The supply air temperature should now be higher than previously in the temperature display of the At home mode. If this is not the case, the additional heating resistor or the relay that controls it is faulty. There is no need to carry out a post-heating test; in fact, the test cannot even be carried out, as the ventilation part of Aito Kotilämpö does not have a post-heating resistor.
Are spare parts available for Valmet Kotilämpö?
Vallox and service centres authorised by Vallox continue to provide the most common spare parts for Valmet Kotilämpö. The price of the spare parts of Kotilämpö can be found in the Vallox spare parts price list.
Where can I find the nearest authorized maintenance and filter retailer?
You can find the closest partners in our map service.
You can choose the right group from the following options: authorized maintenance, installation service, ventilation design, retailer, filter retailer or importer.
Where do I find the type code of my unit?
The type code is provided on the type plate inside the unit.
In ventilation units, the type plate can be found on the inner wall of the unit. In cooker hoods, the type plate can be found either at the bottom of the hood or behind the grease filter. In MyVallox ventilation units, the type code can also be found on MyVallox control, in the Unit information menu.