Vallox > MyVallox 99 CFi enthalpy
MyVallox 99 CFi enthalpy
MyVallox 99 CFi enthalpy
The MyVallox 99 CFi with an enthalpy cell is a low and extremely quiet ventilation unit that fits perfectly above a wash tower, for example. Vallox’s careful air flow optimisation, selected components and well-insulated frame ensure proven quiet operation.
The enthalpy cell recovers both heat and moisture from extract air and transfers them to supply air. This helps maintain pleasant indoor air and prevents excessive dryness, especially during the winter season.
The unit includes integrated carbon dioxide and humidity sensors and versatile control options. Ventilation is boosted automatically according to indoor air quality, and the unit can be controlled with MyVallox Touch or MyVallox Control and through the MyVallox Cloud service. The cloud service enables remote control and automatic updates.
Constant flow fans compensate for pressure differences and keep air flows in balance in windy conditions, tall buildings, during HR cell defrosting and regardless of the heat recovery bypass status. The constant flow feature also compensates for separate extractions and filter contamination. Litre-based air flow adjustment directly from the controller makes installation easier.
Please note! The wall mounting plate must be ordered separately.
The enthalpy cell recovers both heat and moisture from extract air and transfers them to supply air. This helps maintain pleasant indoor air and prevents excessive dryness, especially during the winter season.
The unit includes integrated carbon dioxide and humidity sensors and versatile control options. Ventilation is boosted automatically according to indoor air quality, and the unit can be controlled with MyVallox Touch or MyVallox Control and through the MyVallox Cloud service. The cloud service enables remote control and automatic updates.
Constant flow fans compensate for pressure differences and keep air flows in balance in windy conditions, tall buildings, during HR cell defrosting and regardless of the heat recovery bypass status. The constant flow feature also compensates for separate extractions and filter contamination. Litre-based air flow adjustment directly from the controller makes installation easier.
Please note! The wall mounting plate must be ordered separately.
Including accessories: Condensing water seal Vallox SilentKlick.
- Maximum recommended living area 150 m²
- Maximum extract airflow @ 100 Pa 99 l/s
- Maximum supply airflow @ 100 Pa 96 l/s
- Maximum supply airflow EcoDesign 345 m³/h
Suitable for the following applications
Maximum recommended living area
150 m²
Temperature efficiency of heat recovery (%)
83.8
SEC average climate
-40.437 kWh/m²a
Reference airflow rate
0.067 m³/s
Specific power input (SPI)
0.36 W/(m³/h)
Specific Fan Power (SFP)
1.296 kW/(m³/s)
Maximum extract airflow @ 100 Pa
99 l/s
Maximum supply airflow @ 100 Pa
96 l/s
Minimum airflow
10 l/s
Maximum supply airflow EcoDesign
345 m³/h
Duct outlets pcs
4
Duct outlet mm
125 mm
Product depth mm
625
Product width mm
598
Product height mm
442
Product weight
62.3 kg
Package weight
65.1 kg
ETIM EF003701 electrical connection
Connection cable with protective earthed plug
Mounting place
Wall
Remote monitoring options
MyVallox Cloud service, MyVallox Home network, External voltage message 0-10 VDC
Bus control
Modbus RTU (standard feature)
Extract air fan power consumption
0.119 kW
Supply air fan power consumption
0.119 kW
Sound power level
43 dB
Cell type
Cross-counter flow cell
Cell
Enthalpy
HRU cell bypass
Automatic heat recovery bypass, partial bypass with cool recovery
Defrosting method
Vallox on-demand -defrosting automatics with heat recovery cell bypass
Post-heating
Electrical resistor, 900 W
Additional heating
Electrical resistor, 900 W
Electrical connection
230 V / 50 Hz / 8,6 A
Encapsulation class
IP34
Unit maximum power consumption
2 kW
Coarse filter of supply air
ISO Coarse > 75 %
Fine filter of supply air
ISO ePM1 50%
Coarse filter of extract air
ISO Coarse > 75 %
MyVallox 99 CFi RE02
SKU: 4128108
Product weight: 62.3 kg
Package weight: 65.1 kg
Control panel needs to be ordered separately.
GTIN: 6438326006552
MyVallox 99 CFi LE02
SKU: 4128109
Product weight: 62.3 kg
Package weight: 65.1 kg
Control panel needs to be ordered separately.
GTIN: 6438326006569