Vallox > MyVallox 119 CFi
MyVallox 119 CFi
MyVallox 119 CFi
Coming to sales in spring 2025
The new constant flow feature facilitates set-up and increases living comfort. The MyVallox 119 CFi ventilation unit is equipped with constant flow fans, which compensate for pressure differences and balance ventilation, keeping the air flow always at the preferred level in windy conditions, in tall buildings and during defrosting, regardless of the heat recovery bypass status. The constant flow feature also compensates for separate exhaust fans. MyVallox 119 CFi is a quiet unit that increases living comfort.
The new constant flow feature also makes the installer’s job easier as the air flow control is litre-based, and it can be adjusted directly through the control system.
MyVallox 119 CFi has an innovative two-handed frame, and the handedness of the unit does not need to be decided when ordering the unit. The unit has a door on both sides, and the handedness can be changed just by switching the positions of the doors and turning the unit around. The factory standard is R-handedness. The unit’s front door has separate filter doors. This means that changing the filters is effortless, without the need to open the whole unit.
MyVallox 119 CFi is designed to be energy efficient and to reduce energy consumption and energy costs. The MyVallox 119 CFi ventilation unit’s SEC class is A+.
The new constant flow feature also makes the installer’s job easier as the air flow control is litre-based, and it can be adjusted directly through the control system.
MyVallox 119 CFi has an innovative two-handed frame, and the handedness of the unit does not need to be decided when ordering the unit. The unit has a door on both sides, and the handedness can be changed just by switching the positions of the doors and turning the unit around. The factory standard is R-handedness. The unit’s front door has separate filter doors. This means that changing the filters is effortless, without the need to open the whole unit.
MyVallox 119 CFi is designed to be energy efficient and to reduce energy consumption and energy costs. The MyVallox 119 CFi ventilation unit’s SEC class is A+.
Including accessories: Condensing water seal Vallox SilentKlick, wall mounting plate.
- Maximum recommended living area 190 m²
- Maximum extract airflow @ 100 Pa 117 l/s
- Maximum supply airflow @ 100 Pa 116 l/s
- Maximum supply airflow EcoDesign 416 m³/h
Suitable for the following applications
Maximum recommended living area
190 m²
Temperature efficiency of heat recovery (%)
89.2
SEC average climate
-43.182 kWh/m²a
Reference airflow rate
0.081 m³/s
Specific power input (SPI)
0.237 W/(m³/h)
Specific Fan Power (SFP)
0.853 kW/(m³/s)
Maximum extract airflow @ 100 Pa
117 l/s
Maximum supply airflow @ 100 Pa
116 l/s
Maximum supply airflow EcoDesign
416 m³/h
Duct outlets pcs
4
Duct outlet mm
160 mm
Product depth mm
550
Product width mm
643
Product height mm
932
Product weight
64.8 kg
Package weight
66.8 kg
ETIM EF003701 electrical connection
Connection cable with protective earthed plug
Mounting place
Wall
Remote monitoring options
MyVallox Cloud service, MyVallox Home network, External voltage message 0-10 VDC
Bus control
KNX converter (optional), Modbus RTU (standard feature)
Extract air fan power consumption
0.24 kW
Supply air fan power consumption
0.24 kW
Sound power level
42 dB
Cell type
Cross-counter flow cell
Cell
Aluminium
HRU cell bypass
Automatic heat recovery bypass, partial bypass with cool recovery
Defrosting method
Vallox on-demand -defrosting automatics with heat recovery cell bypass
Post-heating
Electrical resistor, 900 W
Additional heating
Electrical resistor, 1500 W
Electrical connection
230 V / 50 Hz / 12,2 A
Encapsulation class
IP34
Unit maximum power consumption
2.6 kW
MyVallox 119 CFi XA02
SKU: 4122610
Product weight: 64.8 kg
Package weight: 66.8 kg
GTIN: 6438326001441