Vallox > MyVallox 51 CFi
MyVallox 51 CFi
MyVallox 51 CFi
The small size of the MyVallox 51 CFi ventilation unit makes it special. Because MyVallox 51 CFi is only 349 mm deep, it is easy to install in tight spaces, for example, above a toilet seat. The unit makes the implementation of apartment-specific ventilation easy even in small apartments. In terms of air volume, the unit is suited to apartments with a maximum floor are of 75 m2.
The cover panel that is installed on top of the door of MyVallox 51 CFi by means of magnets covers the door screws, giving the unit a stylish and inconspicuous look and making it discreet even when visible. The unit will also please the most aesthetically demanding residents. The available control methods include Vallox Delico PTD EC/KTD A, Vallox X-line PTXP MC/PTXPA MC/KTXA and the MyVallox Touch and MyVallox Control panels. The unit can also be registered with the free MyVallox Cloud service and connected to building automation.
The unit has integrated carbon dioxide and humidity sensors that make it almost a fully automatic system. The sensors boost ventilation as necessary according to the indoor air quality. Optional sensors, such as a humidity sensor, a carbon dioxide sensor, and a VOC sensor, can also be connected to the unit.
The constant flow feature of MyVallox 51 CFi increases living comfort and makes installation easier. MyVallox 51 CFi features constant flow fans that compensate for differences in pressure and keep the air flows in balance in windy locations and tall buildings, during HR cell defrosting, and regardless of the heat recovery bypass status. The constant flow feature also compensates for separate extractions. The new constant flow function also makes the installer’s job easier because it allows litre-based air flow adjustment directly from the controller.
The cover panel that is installed on top of the door of MyVallox 51 CFi by means of magnets covers the door screws, giving the unit a stylish and inconspicuous look and making it discreet even when visible. The unit will also please the most aesthetically demanding residents. The available control methods include Vallox Delico PTD EC/KTD A, Vallox X-line PTXP MC/PTXPA MC/KTXA and the MyVallox Touch and MyVallox Control panels. The unit can also be registered with the free MyVallox Cloud service and connected to building automation.
The unit has integrated carbon dioxide and humidity sensors that make it almost a fully automatic system. The sensors boost ventilation as necessary according to the indoor air quality. Optional sensors, such as a humidity sensor, a carbon dioxide sensor, and a VOC sensor, can also be connected to the unit.
The constant flow feature of MyVallox 51 CFi increases living comfort and makes installation easier. MyVallox 51 CFi features constant flow fans that compensate for differences in pressure and keep the air flows in balance in windy locations and tall buildings, during HR cell defrosting, and regardless of the heat recovery bypass status. The constant flow feature also compensates for separate extractions. The new constant flow function also makes the installer’s job easier because it allows litre-based air flow adjustment directly from the controller.
Including accessories: Condensing water seal Vallox SilentKlick, wall mounting plate.
- Maximum recommended living area 75 m²
- Maximum extract airflow @ 100 Pa 45 l/s
- Maximum supply airflow @ 100 Pa 44 l/s
- Maximum supply airflow EcoDesign 158 m³/h
Suitable for the following applications
Maximum recommended living area
75 m²
Temperature efficiency of heat recovery (%)
88.6
SEC average climate
-42.37 kWh/m²a
Reference airflow rate
0.031 m³/s
Specific power input (SPI)
0.289 W/(m³/h)
Specific Fan Power (SFP)
1.04 kW/(m³/s)
Maximum extract airflow @ 100 Pa
45 l/s
Maximum supply airflow @ 100 Pa
44 l/s
Maximum supply airflow EcoDesign
158 m³/h
Duct outlets pcs
4
Duct outlet mm
125 mm
Product depth mm
349
Product width mm
598
Product height mm
668
Product weight
45.1 kg
Package weight
49.1 kg
ETIM EF003701 electrical connection
Connection cable with protective earthed plug
Mounting place
Wall
Remote monitoring options
MyVallox Cloud service, MyVallox Home network, External voltage message 0-10 VDC
Bus control
Modbus RTU (standard feature)
Extract air fan power consumption
0.035 kW
Supply air fan power consumption
0.035 kW
Sound power level
37 dB
Cell type
Cross-counter flow cell
Cell
Aluminium
HRU cell bypass
Automatic heat recovery bypass, partial bypass with cool recovery
Defrosting method
Vallox on-demand -defrosting automatics with heat recovery cell bypass
Post-heating
Electrical resistor, 900 W
Electrical connection
230 V / 50 Hz / 4,24 A
Encapsulation class
IP34
Unit maximum power consumption
1 kW
MyVallox 51 CFi RA01
SKU: 4128156
Product weight: 45.1 kg
Package weight: 49.1 kg
Control panel needs to be ordered separately.
GTIN: 6438326006156
MyVallox 51 CFi LA01
SKU: 4128157
Product weight: 45.1 kg
Package weight: 49.1 kg
Control panel needs to be ordered separately.
GTIN: 6438326006163